Skip to content
← All articles
Cleaning

Move-out bathroom checklist

4 min read

Part of: Move-out checklist for tenants

Short answer: the move-out bathroom checklist is limescale removed from taps, shower head, screen and tiles, the bath, basin and toilet cleaned including the hidden parts, plugholes cleared, mould cleaned off sealant and grout where it will come off, and the extractor fan dusted. Chrome and glass are what a clerk checks most closely.

This move-out bathroom checklist is for tenants in their last week, and for landlords and agents preparing a tenant for check-out. It is part of our room-by-room move-out checklist. Sanitary ware is one of the four areas clerks look at first when they grade cleanliness, and limescale and soap scum are among the most common cleaning issues found at check-out.

What should a move-out bathroom cleaning checklist include?

A move-out bathroom cleaning checklist should include every fixture the clerk will run, flush or look behind:

  • Taps, plugs, wastes and overflows: descaled and polished, with the scum under the plug removed.
  • Shower head and riser: descaled; a soak in descaler usually clears the jets.
  • Shower screen and door: limescale and water marks removed from the glass, and the seal along the bottom wiped.
  • Bath and shower tray: soap scum removed, including the grips and the corners.
  • Basin and pedestal: cleaned, with the area behind the pedestal included.
  • Toilet: bowl descaled under the rim, seat hinges and the base cleaned, cistern lid and flush button wiped.
  • Tiles and grout: soap splashes and limescale removed; light mould on grout cleaned off.
  • Sealant: mould cleaned where it lifts, and any that will not lift noted in your photographs.
  • Extractor fan: grille dusted, and switched on to check it works.
  • Mirror, cabinet and shelves: glass smear-free, shelves emptied and wiped.
  • Towel rail, radiator, door and skirting: dusted and wiped.
  • Floor: mopped, including behind the toilet.

Is mould in the bathroom the tenant’s responsibility at move-out?

Mould in the bathroom is not automatically the tenant’s responsibility at move-out; it depends on why it is there. Clerks look at the facts: whether there is a working extractor fan, whether the heating works, and whether there is any sign of a leak or water damage, usually high on a wall or ceiling. Mould where no working extractor was provided points to the landlord. Mould where a working fan was there and not used is more likely to be charged to the tenant. Mould on a window or tile that wipes straight off is a cleaning issue. If the fan broke during the tenancy, find the message where you reported it.

Is discoloured sealant fair wear and tear?

Minor discolouration to sealant and grout is commonly treated as fair wear and tear, particularly after a long tenancy. Fair wear and tear is the gradual deterioration that comes from normal everyday use, and mydeposits’ guidance says adjudicators consider the length of the tenancy and the condition at the start. Silvering on a chrome plug and fine cleaning scratches on chrome are also usually wear. Heavy black mould across fresh sealant after a short tenancy, or a cracked basin, is a different matter.

What should you photograph in the bathroom before you leave?

Photograph the bathroom before you leave: a wide shot from the door, then the taps, the shower head, the screen, the sealant along the bath or tray, the inside of the toilet and the extractor fan. Keep the original files so the date and time stay with them.

Key takeaways

  • Descale every chrome fitting and the shower screen; that is where a clerk looks first.
  • Clean mould off sealant and grout where it lifts, and photograph any that will not.
  • Who pays for bathroom mould turns on the extractor fan, the heating and any leak, not on the mould alone.
  • Minor sealant discolouration and silvering on chrome are usually fair wear and tear.

Where InventorySafe fits

InventorySafe is a UK property inventory service: clerks capture photos, video and voice notes at every visit, and each report is drafted with AI, with every observation citing a photograph, then reviewed and signed by the clerk. We work for agents and landlords, and our clerks photograph the sealant, fixtures and extractor fan at check-in, so a mould question at check-out starts from what was recorded on day one.

Common questions

How do I remove limescale before moving out?
Use a descaler or a vinegar solution on taps, the shower head and the screen, leave it to work, then rinse and dry the chrome so it does not water-mark. Avoid abrasive pads on chrome and glass, which leave scratches.
Will I be charged for black mould on the shower sealant?
It depends on the cause. If there was no working extractor fan or there was a leak, the landlord is usually responsible; if a working fan was not used, a deduction is more likely. Clean what you can and photograph what remains.
Do I need to replace the shower sealant when I move out?
Not usually. Sealant that has discoloured through normal use is generally fair wear and tear. Ask the landlord before resealing, because a poor DIY job can be treated as damage.
Is limescale on taps a cleaning issue at check-out?
Yes. Limescale, soap scum and water marks are things that can be cleaned off, so if they were not present at check-in they are usually recorded as a cleaning issue at check-out.

See a report from one of your own properties.

Book a demo, or tell us where your portfolio is and we’ll confirm clerk coverage.

Book a demo

Request a booking

We’ll confirm availability and the final price by email.

1The visit
Type of report
Property size
Extra spaces · garage, loft, cloakroom… £10 each
0
2The property

3Your details