Skip to content
← All articles
Compliance

Who tests and repairs alarms in a rental?

4 min read

Part of: Landlord compliance checklist for England

Short answer: in England a landlord must check that every required smoke and carbon monoxide alarm is in proper working order on the day a new tenancy starts. During the tenancy, once a tenant reports an alarm is not working, the landlord must repair or replace it as soon as reasonably practicable.

The alarm check on the first day of a tenancy is the one alarm duty tied to a single date, and the hardest to prove afterwards if nobody wrote it down. This guide is for landlords, agents and clerks running a check-in. It was checked against legislation.gov.uk on 21 November 2026, covers England only, and is part of our landlord compliance checklist for England. It is not legal advice.

What does the first day of tenancy check require?

Regulation 4 of the Smoke and Carbon Monoxide Alarm (England) Regulations 2015 says checks must be made to ensure each required alarm is in proper working order, and for a new tenancy the check falls on the day the tenant becomes entitled to possession. A check-in on move-in day is the natural place to do it:

  • First, find every smoke alarm and every carbon monoxide alarm in the property.
  • Then, press the test button on each one and confirm it sounds.
  • Note each alarm’s floor, room and type, and any replacement date printed on it.
  • Photograph each alarm in place.
  • Note any alarm that cannot be reached, rather than leaving it out.
  • Fix any alarm that fails before the tenant takes the keys, or record that it failed and what was done.

What does an alarm test prove?

Pressing the test button shows that an alarm has power and sounds on the day. It does not prove the sensor will detect smoke or carbon monoxide, that the alarm is in date, or that the property meets every other fire safety rule. A good check-in records exactly what was tested and what was not.

Who repairs a faulty alarm during the tenancy?

The landlord does. Since 1 October 2022, regulation 4 requires the landlord to repair or replace an alarm once a tenant reports it is not in proper working order, as soon as reasonably practicable. The regulations set no fixed number of days.

Who tests the alarms during the tenancy?

The regulations place the first-day check on the landlord and say nothing about routine testing after that. Government guidance encourages tenants to test their alarms regularly and report a fault to the landlord. A tenant whose landlord does not act can report it to the council, which enforces with a 28-day remedial notice and a penalty of up to £5,000.

The law asks for a working alarm on day one. The only proof of day one is a dated record made on day one.

Key takeaways

  • Every required alarm must work on the day a new tenancy starts.
  • A press of the test button proves power and sound, not the sensor or the date.
  • A reported fault must be fixed as soon as reasonably practicable.
  • Tenants are encouraged to test during the tenancy and report faults in writing.

Where InventorySafe fits

InventorySafe is a UK property inventory service: clerks capture photos, video and voice notes at every visit, and each report is drafted with AI, with every observation citing a photograph, then reviewed and signed by the clerk. Our check-ins and mid-terms test and photograph every smoke, heat and carbon monoxide alarm within reach, and our report says the test confirms power, not regulatory compliance. If an alarm is missing, our clerks can fit one for £50 when it is mentioned at booking.

Common questions

Does a landlord have to test smoke alarms at the start of a tenancy?
Yes. In England the landlord must check that every required smoke and carbon monoxide alarm is in proper working order on the day the tenant becomes entitled to possession under a new tenancy.
How quickly must a landlord fix a faulty smoke alarm?
As soon as reasonably practicable after the tenant reports it. The regulations set no fixed number of days, but a council can serve a remedial notice giving 28 days if the landlord does not act.
Is the tenant responsible for testing smoke alarms?
The regulations do not put a routine testing duty on the tenant, but government guidance encourages tenants to test alarms regularly and tell the landlord about a fault. Changing a battery in a battery alarm is commonly left to the tenant.
What should a check-in record about alarms?
Each alarm’s floor, room and type, whether it sounded when tested, any replacement date printed on it, a photograph, and any alarm that could not be reached or tested.

See a report from one of your own properties.

Book a demo, or tell us where your portfolio is and we’ll confirm clerk coverage.

Book a demo

Request a booking

We’ll confirm availability and the final price by email.

1The visit
Type of report
Property size
Extra spaces · garage, loft, cloakroom… £10 each
0
2The property

3Your details