How to prepare a property for an inventory
4 min read
Part of: Rental inventory checklist
Short answer: to prepare a property for an inventory, finish the cleaning and repairs first, leave every item that will stay in its final place, gather every key and fob, and make sure the clerk can reach the meters and alarms. The inventory records the property as it is on the day, so anything still to be done will be recorded as it stands.
This checklist is for landlords and letting agents getting a property ready before the inventory clerk arrives. It is part of our inventory checklist guide. How you prepare a property for an inventory decides what the baseline says: a contractor still working, a cleaner halfway through or a missing set of keys all end up in the report, and the check-out is later measured against it.
When should the inventory happen?
The inventory should happen after every repair, decoration and clean is finished, and as close to the tenant’s move-in as practical. If works continue after the clerk leaves, the report no longer describes the property the tenant receives, and fresh paint or a new carpet laid afterwards will not be in it.
How do you prepare a property for an inventory?
Before the clerk arrives, work through this list:
- First, finish all repairs and decoration, and remove contractors’ tools, dust sheets and offcuts.
- Then, have the property cleaned to the standard you will expect back at check-out, including inside the oven, fridge and kitchen cupboards. Keep the cleaning receipt.
- Remove everything that will not stay for the tenant. Anything left behind is listed as part of the let.
- Put furniture and appliances that will stay where they will be used, so the clerk records the room as the tenant will find it.
- Gather every key, fob and remote for the tenant’s set, including window, letterbox, meter cupboard and bike store keys, and label any you are unsure about.
- Make sure the meter cupboards can be opened, and say if a meter is in a communal area or behind a concierge.
- Check the electricity and water are on, so lights, appliances, taps and showers can be tested.
- Check there is a smoke alarm on every storey and a carbon monoxide alarm in any room with a fixed combustion appliance other than a gas cooker.
- Leave appliance manuals and any guarantees in a kitchen drawer, so they can be listed.
- Tell the clerk about anything they cannot see, such as a loft that is not part of the let, or items in storage.
Why do the alarms need checking before the inventory?
The alarms need checking beforehand because, under the Smoke and Carbon Monoxide Alarm (England) Regulations 2015 as amended, a landlord in England must make sure each required alarm is in proper working order on the day a new tenancy begins. If the clerk finds an alarm missing or not working, it is far easier to fix before move-in than after.
Which certificates should be ready on the day?
The safety certificates are not part of the inventory, but they should be ready to hand over. Under the Gas Safety (Installation and Use) Regulations 1998, a new tenant must have the latest gas safety record before they move in, and in England the Electrical Safety Standards Regulations 2020 require the same for the electrical installation condition report. The clerk can note that these were left in the property, but cannot issue or check them.
The inventory records what is there on the day. Prepare for the report you want to be measured against at check-out.
Key takeaways
- Book the inventory after all works and cleaning are finished.
- Anything left in the property is recorded as part of the let, so clear what is not staying.
- Gather the tenant’s full key set and make sure every meter can be reached.
- Check the alarms beforehand, because they must work on the first day of the tenancy.
Where InventorySafe fits
InventorySafe is a UK property inventory service: clerks capture photos, video and voice notes at every visit, and every condition in the signed report is backed by a time-stamped photograph. If smoke or carbon monoxide alarms are missing on the day, our clerks are equipped to fit them for £50 each; mention it when you book.
Common questions
- Does the property need to be empty for an inventory?
- Not empty, but it should contain only what the tenant will have. Anything left in the property is usually listed as part of the let, so remove personal belongings and items you intend to take away.
- Should a property be cleaned before the inventory?
- Yes. The inventory states how clean the property is at the start, and the check-out is compared with it. A property cleaned after the inventory gets no credit for that clean in the report.
- Does the landlord need to be present for the inventory?
- No. The clerk usually only needs the keys and access to the meters. It helps to be available by phone in case a key does not work or a meter cannot be found.
- What happens if repairs are still being done on the day?
- The clerk records the property as it is, including unfinished work. If the works will change what the tenant receives, it is usually better to rebook the inventory for after they finish.