How to read an inventory room table
4 min read
Part of: Sample inventory report walkthrough
Short answer: each row of an inventory room table is one item. The Ref is its number for amendments, the Item is its name, the Description says what it is in bullet points, and the Condition lists its state on the day, one finding per bullet, including what was tested and what could not be seen.
The room tables are most of an inventory report, and they are where agents, landlords and tenants will spend most of their time. This guide explains how to read an inventory room table, using the kitchen from our free sample report. It is part of our sample inventory report walkthrough.
What do the four columns in an inventory room table mean?
Each room starts with its numbered heading, such as “4. Kitchen”, and a table with four columns:
- Ref: the room’s section number and the item’s position, so 4.9 is the ninth item in the first room. Quote it when asking for an amendment.
- Item: the name of the thing, kept short, such as Windows, Worktop or Dishwasher.
- Description: what the item is, one feature per bullet, such as “White uPVC window” and “2 white plastic handles with lock”.
- Condition: its state at the visit, one statement per bullet, such as “Window tested and working” and “Keys not seen”.
Why does every room start with the same items?
Every room in our report follows the same opening list, in the same order: Door, Door Frame, Woodwork, Ceiling, Lights, Switches, Sockets, Walls, Windows, Curtains, Flooring, Heating and Alarms. Only then come the items particular to that room, such as kitchen units, worktop, sink and appliances in a kitchen. A fixed order means nothing is forgotten and a reader always knows where to look.
What do None and Not present mean in an inventory?
They mean the item is not there. If a room has no door, its Door row is still printed: our reports put None in the Description column and Not present in the condition column (older reports, including our sample, print None in both). In the sample the kitchen is open to the next room, so ref 4.1, Door, reads None. Recording absence is different from leaving it out: “it is not there” is a statement a deposit can turn on, whereas a missing row leaves the reader guessing.
How do you read a condition line?
Read a condition line as what was found, where it was found and how much of it. Clerks place defects against a fixed point in the room rather than their own left or right, and give the height. A line in our sample reads “Small indent at mid level right hand side from washing machine”. Common wording you will see:
- Tested and working, or Tested and power seen: the clerk tried it and it responded.
- Not tested: it was deliberately left untested, as radiators and sockets often are.
- Not seen: the clerk looked for it and could not find it, such as window keys.
- Light, minor or heavy: how severe a mark is.
- From mid to low level, at high level: where on the surface it is.
Where one item has two materials, such as walls that are part painted and part tiled, the findings for each part are grouped under it. Where the clerk recorded no finding on a photographed item, our check-in prints “In good condition”.
Key takeaways
- Each row is one item, and its ref is the number to quote in an amendment.
- Description says what the item is; condition says what state it is in.
- Every room opens with the same thirteen items, so absences are recorded rather than skipped.
- Condition lines give the finding, the position and the severity, and say what was not tested.
Where InventorySafe fits
InventorySafe is a UK property inventory service: clerks capture photos, video and voice notes at every visit, and each report is drafted with AI, with every observation citing a photograph, then reviewed and signed by the clerk. Our room tables are fully itemised, down to small contents such as tableware, so check-out can be done line by line.
Common questions
- What is the difference between description and condition in an inventory?
- The description identifies the item, such as its colour, material and fittings, and stays the same between visits. The condition records its state, such as marks, damage or cleanliness, and is recorded again at every visit.
- What does not tested mean on an inventory?
- It means the clerk deliberately did not test that item, often because testing is limited to power where practical. It is not a statement that the item does or does not work.
- Why are items in an inventory numbered?
- The numbers let everyone refer to exactly the same item. InventorySafe asks for any amendment to quote the item’s reference number, and those numbers stay the same at check-out.
- Should an inventory record items that are missing?
- Yes. A good inventory records an expected item that is not there, rather than leaving it out, so it is clear the clerk checked. In our reports such an item reads None in the Description column and Not present in the condition column.