Inventory report cover and disclaimer
4 min read
Part of: Sample inventory report walkthrough
Short answer: the inventory report cover says which property, which visit and who the report was prepared for, the contents page tells you where each room and section starts, and the disclaimer sets the rules for reading the rest, including how to request amendments and what the clerk did not inspect or test.
Agents, landlords and tenants tend to skip the first pages of an inventory report and go straight to the rooms. This guide, part of our sample inventory report walkthrough, explains why the inventory report cover, contents page and disclaimer are worth two minutes. Our free sample pack has its own cover and contents and leaves out the disclaimer pages, so this guide describes what a full InventorySafe report prints.
What does an inventory report cover page show?
The inventory report cover identifies the document. On an InventorySafe report the cover is titled with the type of visit, such as “Inventory and check-in Report”, and lists:
- Address, printed without a date so the date is never read as part of the property’s identity.
- Date of the inspection.
- Prepared for, the party who instructed the report.
- Property type, such as the number of bedrooms and whether it is furnished.
- Supporting document, where the visit was read against an earlier report, named with its type, the firm and the date.
- A photograph of the front of the building with its capture time, or our logo where no exterior photograph was taken.
The cover also carries a short note that any amendment must cite the reference number of the item and reach us within seven working days of delivery.
How do you use the contents page?
The contents page is one list of every section with its page number, printed the way each section heading prints, such as “1. Keys” or “4. Kitchen”. A long report is often printed or emailed a few pages at a time, so the contents page is the quickest way to find one room. Every page of our report also repeats the type of visit and the address in its footer, so a single page still says where it came from.
What does the inventory report disclaimer say?
The disclaimer explains how the report should be read and what it does not claim. Disclaimers differ between providers, so read the one in your own report. Ours includes these points:
- Amendments must cite a reference number and should reach us within seven working days of delivery.
- A blank condition column is a statement: the item was free from obvious defects, damage or soiling, or unchanged since last recorded.
- Only photographs and video taken by our clerk form part of the report.
- Where access, lighting or an obstruction stopped an item being inspected fully, the report says so.
- Heavy furniture is not moved, so nothing is claimed about the floor beneath it or the wall behind it.
- Testing is for power only where practical; boilers, gas fires, water supply, fire alarm systems and radiators are not tested.
- A “fire label seen” note records that a label was attached, not that the item complies with the furniture fire safety regulations.
- Any liability suggestion is advisory; the decision rests with the parties or an adjudicator.
Why does the disclaimer matter in a deposit dispute?
The disclaimer matters because it decides what a blank cell or an untested item means. A tenant who reads that heavy furniture was not moved knows the report makes no claim about the carpet under the wardrobe. A landlord who reads that alarm tests confirm power only knows the report is not a compliance certificate. Our disclaimer is versioned, so a report always prints the wording that applied on the day it was written.
Key takeaways
- The inventory report cover tells you the property, the date, the visit type and who instructed it.
- The contents page and the footer on every page let you find and identify any page on its own.
- The disclaimer explains blank cells, untested items and the limits of the inspection.
- Amendments to an InventorySafe report quote a reference number and arrive within seven working days.
Where InventorySafe fits
InventorySafe is a UK property inventory service: clerks capture photos, video and voice notes at every visit, and each report is drafted with AI, with every observation citing a photograph, then reviewed and signed by the clerk. Every report states its own limits up front, so the reader knows what was and was not checked.
Common questions
- How long do I have to dispute an inventory report?
- It depends on the provider. InventorySafe’s reports ask for any amendment, quoting the item’s reference number, within seven working days of delivery, after which the report stands.
- What does a blank condition box mean in an inventory?
- In an InventorySafe report, a blank condition means the item was free from obvious defects, damage or soiling, or unchanged since it was last recorded. It is a statement, not an omission.
- Does an inventory clerk move furniture?
- Usually not. InventorySafe clerks do not move heavy furniture or appliances, and the report makes no claim about what is beneath or behind them.
- Is an inventory report a safety certificate?
- No. An inventory records what the clerk saw and tested on the day; alarm and appliance tests confirm power only, and safety compliance remains the landlord’s or agent’s responsibility.