Keys, meters and alarms in an inventory
4 min read
Part of: Sample inventory report walkthrough
Short answer: in our report, keys, meters and alarms are sections 1, 2 and 3, printed before the rooms. The keys page lists each key in the clerk’s own words with who handed them over, the meters page gives each meter’s location, serial number, reading and balance, and the alarms page records each alarm’s location, test result and replacement date, all with photographs.
Keys, meters and alarms in an inventory report are the facts agents, landlords and tenants most often need in a hurry: how many keys were handed over, what the meter read on move-in day, and whether the alarms worked. This guide is part of our sample inventory report walkthrough. For what to record on the day, see our separate post on meters and keys at check-in.
How do you read the keys page?
Read the keys page as a list of lines, one per key or group of keys, each written the way the clerk dictated it, such as “1 x Yale key for front door top lock”. The detail matters: “top lock” is what tells two front door keys apart if one does not come back. Under the list, our report prints:
- Photographs of the keys, captioned “Ref 1.1 Keys” with the capture time.
- Collected from, who the clerk got the keys from, such as the agent.
- Handed to, who the keys were given to, such as the tenant.
- A signature box beside the list.
At check-out the keys page shows the check-in list and the check-out list side by side, with a Discrepancies line where the clerk notes any key missing or added.
How do you read meter readings in an inventory?
Each meter is a numbered row, 2.1, 2.2 and so on, with its name, location, serial number and reading. Our report prints meters in a fixed order, electricity first, then gas, water and heat, and prints each register on its own line, so a reading and a prepayment balance are never run together into one number. Every photograph of each meter prints, captioned with its ref and name, such as “Ref 2.1 Electricity meter”, because a meter often shows its reading and its balance on different screens. Use the serial number to check you are looking at the right meter before passing a reading to a supplier.
What does the alarms page tell you?
The alarms page lists every smoke, heat and carbon monoxide alarm the clerk found, numbered from 3.1, with its floor and location, test result, replacement date and any comments. Where no replacement date could be read, it says “Not seen”. An alarm test in our report confirms power only: it does not certify that the alarm works correctly or that the property complies with any regulation. Where the alarms found do not meet the requirements, our report prints an “Action required” statement under the table.
What are the alarm rules for rented homes in England?
In England, under the Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022, landlords must fit a smoke alarm on every storey used as living accommodation, and a carbon monoxide alarm in any room used as living accommodation that has a fixed combustion appliance, other than a gas cooker. The government’s guidance also says alarms must be checked to be working on the day a new tenancy begins. Wales and Scotland have their own rules. An inventory records what was found; meeting the rules is the landlord’s responsibility.
Key takeaways
- Keys are listed in the clerk’s own words, with who they were collected from and handed to.
- Each meter has a numbered row with serial number, reading and balance, and every photo of it prints.
- An alarm test confirms power only and is not a compliance certificate.
- In England, smoke alarms are needed on every storey with living accommodation, and CO alarms beside fixed combustion appliances other than gas cookers.
Where InventorySafe fits
InventorySafe is a UK property inventory service: clerks capture photos, video and voice notes at every visit, and each report is drafted with AI, with every observation citing a photograph, then reviewed and signed by the clerk. Our clerks photograph every key, meter and alarm, and can fit a missing smoke or carbon monoxide alarm on the day for £50 if you mention it when booking.
Common questions
- Does an inventory include meter readings?
- Most check-in and check-out reports do. An InventorySafe report records each meter’s location, serial number, reading and any balance, with photographs, where the meter can be reached.
- Does the inventory clerk test the smoke alarms?
- InventorySafe clerks test alarms they can safely reach, and the test confirms power only. An alarm out of reach is recorded but not tested, and the report says so.
- What happens if keys are missing at check-out?
- The check-out report shows the check-in and check-out key lists side by side, and the clerk notes any missing or extra keys as a discrepancy. Who pays for a replacement is then for the parties, or a deposit scheme adjudicator, to decide.
- Who is responsible for smoke and carbon monoxide alarms in a rented home in England?
- The landlord. Under the Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022, the landlord must fit the required alarms and make sure they are working on the day a new tenancy begins.