The schedule of condition explained
4 min read
Part of: Sample inventory report walkthrough
Short answer: the schedule of condition is a one-page summary of the whole property, read before the room tables. It opens with the cleanliness rating, then summarises each heading, such as decoration, windows, flooring and appliances, in short statements, and any heading nobody recorded is left blank.
For agents, landlords and tenants, the schedule of condition is the page to read first. It answers the two questions most deposit conversations start with: was the property clean, and was anything wrong with it? This guide is part of our sample inventory report walkthrough and uses the schedule page from our free sample report.
What is a schedule of condition in an inventory report?
A schedule of condition is a summary table of the property’s overall state, heading by heading. In our report it has two columns, Name and Condition, and each heading’s condition is a short bullet list. The headings in our sample are:
- Cleanliness rating
- Decorative condition, covering walls, paintwork and tiling
- Lights, Windows, Curtains and Flooring
- Fixtures, such as sockets, radiators and kitchen panels
- Furniture, including whether fire labels were seen
- Sanitary ware and Appliances, with what was tested
- Manuals, noting where any user guides were left
- Odour, which reads “Neutral” unless the clerk records otherwise
What do the cleanliness ratings mean?
The cleanliness rating is the clerk’s single grade for how clean the property is. InventorySafe clerks choose from Professional level clean, Professional level clean with exceptions, Domestic level clean or Not clean, or write their own words under Other. In broad terms, a professional clean means the whole property is cleaned to a professional standard, “with exceptions” means a professional clean with a small number of omissions, a domestic clean means a basic clean where several areas need more work, and not clean means substantial cleaning is needed. The wording and definitions vary between inventory providers.
What are cleaning omissions?
Cleaning omissions are the specific places that fall short of the rating. A rating of “with exceptions” is only useful if the exceptions are named. In our sample, the rating is Professional level clean with exceptions, and the omissions are listed line by line under their headings, such as a minor cobweb to window handles, light water marks to a bath tap and minor grease residue to the oven edges. The Report Preview email lists the same omissions with photographs.
Why is a heading sometimes blank?
A blank heading in our schedule of condition means nobody recorded anything under it. The clerk writes or dictates each heading on site, and our report never fills a heading in on the clerk’s behalf. A blank is more honest than “in good condition” about something nobody summarised. The room tables still hold the detail for every item.
How does the schedule work on a check-out?
On a check-out our schedule of condition still has one Condition column, describing the state the property is handed back in. Comparing it with the check-in schedule shows at a glance whether the cleanliness rating has changed, which is often the first thing a cleaning deduction turns on.
Key takeaways
- Read the schedule of condition first: it summarises cleanliness and condition for the whole property.
- The cleanliness rating is one of four set grades, or the clerk’s own words.
- “With exceptions” should always come with the exceptions listed.
- A blank heading means nothing was recorded there, not that it was perfect.
Where InventorySafe fits
InventorySafe is a UK property inventory service: clerks capture photos, video and voice notes at every visit, and each report is drafted with AI, with every observation citing a photograph, then reviewed and signed by the clerk. Every inventory, check-in and check-out states a cleanliness rating with any omissions listed line by line and backed by photos.
Common questions
- What is the difference between a schedule of condition and an inventory?
- An inventory lists every item in every room with its description and condition. A schedule of condition is a short summary of the whole property’s condition and cleanliness, usually printed near the front of the inventory report.
- What does professional level clean with exceptions mean?
- It means the property was cleaned to a professional standard apart from a small number of omissions. A good report lists each omission so everyone knows exactly what was missed.
- Who decides the cleanliness rating in an inventory?
- The clerk decides it on site. In an InventorySafe report the cleanliness rating is always the clerk’s own judgement and is never generated automatically.
- Can a tenant be asked to return a property cleaner than it was?
- Generally, a tenant is expected to return the property to the standard recorded at check-in, allowing for fair wear and tear, not to a higher one. Comparing the two cleanliness ratings is the usual starting point.