What to photograph in a bedroom
3 min read
Part of: What to photograph in each room
Short answer: in a bedroom, photograph under the bed frame and both sides of the mattress, the slats, any fire label on soft furnishings, and inside every wardrobe, chest of drawers and bedside unit. Add the curtains or blinds from both sides, with any safety cleat.
Knowing what to photograph in a bedroom means looking under and inside things, because the parts of a bedroom most often argued about are hidden in a quick walk-through. This checklist is for landlords and agents letting a furnished room or home, tenants recording a bedroom at move-in or move-out, and new clerks. It is part of our guide to what to photograph in each room, which covers the rules for every room, such as the four wall shots first.
What should you photograph in a bedroom?
After the room-wide shots and the core items, work through this bedroom checklist:
- The bed overall, with the headboard and any drawers in the base.
- Under the bed frame, showing the slats, which are often missing or broken.
- The top of the mattress, then the underside where it can safely be lifted.
- The fire label on the mattress and other soft furnishings, close enough to read.
- The wardrobe outside, then opened: rails, shelves, drawers and door hinges.
- Every chest of drawers and bedside unit, with each drawer opened.
- The dressing table and any mirror, close up for chips or cracks.
- The curtains or blinds closed, the reverse of the curtains, and the cord safety cleat.
Why photograph under the mattress?
Under the mattress is worth photographing because slats are one of the most common bedroom problems and they cannot be seen with the bed made. A clerk lifts the mattress where it is safe to do so. Where a mattress is too heavy, the record should say so, for example appears in good condition however not fully inspected due to weight of mattress, because a stated limit protects everyone better than silence.
What does a fire label photograph prove?
A fire label photograph proves that a label was attached to the item on the day. It does not prove the item complies with the fire safety regulations for furniture, and an inventory should not claim that it does. Record each item as fire label seen or fire label not seen.
Is a stained mattress wear and tear?
General ageing of a mattress over a tenancy is usually treated as fair wear and tear, while a fresh, ingrained stain across the top is more often treated as damage. The check-in photograph of the top of the mattress is what shows which, so take it before any bedding goes on.
Key takeaways
- Photograph under the bed and both sides of the mattress, and state what could not be lifted.
- Photograph each fire label as seen or not seen, without claiming compliance.
- Open every wardrobe and drawer and photograph the inside.
- Photograph curtains from both sides, because water marks show on the reverse.
Where InventorySafe fits
InventorySafe is a UK property inventory service: clerks capture photos, video and voice notes at every visit, and each report is drafted with AI, with every observation citing a photograph, then reviewed and signed by the clerk. Our reports state the limits of each inspection, such as a mattress not lifted, rather than leaving a gap.
Common questions
- Should I photograph the mattress at move-in?
- Yes, the top and, where you can, the underside, before any bedding goes on. A mattress stain is a common check-out question and only a check-in photograph shows whether it was already there.
- Does a fire label mean the furniture is compliant?
- No. A fire label being present is a good sign, but an inventory records only that the label was seen. Whether furniture meets the fire safety regulations is a question for the landlord, not the inventory.
- Do I need to photograph inside empty wardrobes?
- Yes. The rails, shelves and hinges inside a wardrobe can be damaged, and the inside is where marks and debris are found at check-out.
- What should I photograph on a blind?
- Photograph the blind down and up, any broken slats, and the cord safety cleat if there is one. An inventory records that the blind works, not that it meets child-safety requirements.